Well, the message says it all... I'd like to boost the Ram in my QL, ideally with a 512k or bigger (?) RAM module, but with a through connector (just in case a QL SD system needs to be attached this way at a later date!). Let me know if you have one for a reasonable price...
Alternatively, if someone can assure me that a QL SD won't be connecting through the expander slot, RAM without a through connector would also be an option...
I'm not interested in Trump/Gold cards right now.... Just in case...
Wanted: ExpanderRAM
-
- Brittle Membrane
- Posts: 118
- Joined: Sun Sep 08, 2013 10:52 pm
Wanted: ExpanderRAM
Unpacking a JS-ROM QL, with a QL-SD and SuperQBoard, and busily refelting millions of microdrives
-
- Brittle Membrane
- Posts: 118
- Joined: Sun Sep 08, 2013 10:52 pm
Re: Wanted: ExpanderRAM
SORTED! I love this forum!
Unpacking a JS-ROM QL, with a QL-SD and SuperQBoard, and busily refelting millions of microdrives
- vanpeebles
- Commissario Pebbli
- Posts: 2852
- Joined: Sat Nov 20, 2010 7:13 pm
- Location: North East UK
-
- RWAP Master
- Posts: 2892
- Joined: Sun Nov 28, 2010 4:51 pm
- Location: Stone, United Kingdom
- Contact:
Re: Wanted: ExpanderRAM
There are always people looking for expanderams...
I have a couple of PCML 512K memory expansions - but they are dead end (no through connector) and hard to remove from the QL as they do not protrude from the case...
However, they may suffice for someone once the QL-SD Interfaces launch!
I have a couple of PCML 512K memory expansions - but they are dead end (no through connector) and hard to remove from the QL as they do not protrude from the case...
However, they may suffice for someone once the QL-SD Interfaces launch!
Rich Mellor
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm