QConnect Software
-
- Font of All Knowledge
- Posts: 4610
- Joined: Mon Dec 20, 2010 11:40 am
- Location: Sunny Runcorn, Cheshire, UK
Re: QConnect Software
Many thanks Derek! I have the manual, I'm just lacking the software, but I'm sure that will be very useful to others. If it would be possible to get hold of the program too, that would be brilliant 

-
- RWAP Master
- Posts: 2890
- Joined: Sun Nov 28, 2010 4:51 pm
- Location: Stone, United Kingdom
- Contact:
Re: QConnect Software
I don't see any harm in uploading the software here as it only works if you have the Tandata modem stack.
There was a later version released by Quanta, but that would need their permission to distribute.
I have at least 2 versions of the software (copied into windows folders using q-emulator), so you will need to unzip them to a desktop then use q-emulator to get them back onto disk. If you could check which version works (If any) and let Dilwyn have the relevant version he could upload it to the Sinclair QL Homepage (although Dilwyn prefers them to be zipped from within the QL).
See attachments to this post for the various versions I have - no idea as to whether they might have different version numbers etc...
There was a later version released by Quanta, but that would need their permission to distribute.
I have at least 2 versions of the software (copied into windows folders using q-emulator), so you will need to unzip them to a desktop then use q-emulator to get them back onto disk. If you could check which version works (If any) and let Dilwyn have the relevant version he could upload it to the Sinclair QL Homepage (although Dilwyn prefers them to be zipped from within the QL).
See attachments to this post for the various versions I have - no idea as to whether they might have different version numbers etc...
- Attachments
-
- QConnect - 2 versions.zip
- (108.63 KiB) Downloaded 235 times
Rich Mellor
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
Re: QConnect Software
Awesome, many thanks Rich!
I'll give these a try. Having a quick look on q-emulator, all versions supplied flash up briefly that they are version 2.0, before the main menu comes up. So at least at face value, the only variation appears to be the different mdv/flp versions.
I'll get them over to my QL and see what's what. It will be a good exercise for me to figure everything out as someone returning to the scene, just in terms of the task of getting the files onto a QL format disc and zipping them natively on the QL, as much as anything else...
I'll keep you posted!
I'll give these a try. Having a quick look on q-emulator, all versions supplied flash up briefly that they are version 2.0, before the main menu comes up. So at least at face value, the only variation appears to be the different mdv/flp versions.
I'll get them over to my QL and see what's what. It will be a good exercise for me to figure everything out as someone returning to the scene, just in terms of the task of getting the files onto a QL format disc and zipping them natively on the QL, as much as anything else...
I'll keep you posted!
-
- RWAP Master
- Posts: 2890
- Joined: Sun Nov 28, 2010 4:51 pm
- Location: Stone, United Kingdom
- Contact:
Re: QConnect Software
I wonder who Scicon are mentioned in the boot file - "Copyright Scicon 1985"
Rich Mellor
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
Re: QConnect Software
Yes that's an interesting one. The software is singled out for particular praise here: https://www.sinclairuser.com/040/qlhard.htm
...but that's all I could find with a basic Google
...but that's all I could find with a basic Google
-
- RWAP Master
- Posts: 2890
- Joined: Sun Nov 28, 2010 4:51 pm
- Location: Stone, United Kingdom
- Contact:
Re: QConnect Software
It was probably Scicon Limited - wound up in 2012 - https://beta.companieshouse.gov.uk/company/00920329RWAP wrote:I wonder who Scicon are mentioned in the boot file - "Copyright Scicon 1985"
No sign of who the directors were in the 80s, but I have reached out to someone on LinkedIn who was a developer for the company in case he can clarify them / still has any source code!
Rich Mellor
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
RWAP Software
RWAP Adventures
SellMyRetro
Retro-Printer Module - add a USB printer to your QL
Also Involved in:
Icephorm
Re: QConnect Software
I have just acquired the tandata stack does anyone know where I can get qconnect as not with them
Re: QConnect Software
https://www.ebay.de/itm/TANDATA-Q-CONNE ... 2007126456Raptor wrote:where I can get qconnect
-
- ROM Dongle
- Posts: 39
- Joined: Fri Nov 05, 2021 2:54 pm
Re: QConnect Software
Thank god for forums like this, I just found my Q-Connect stack of 3 modules. The manual I have is intact and aside from some scribblings from a previous owner, in great condition.
Sadly the microdrive cartridge self destructed some time ago, so very happy to have found the software for download here.
Good stuff folks.
Sadly the microdrive cartridge self destructed some time ago, so very happy to have found the software for download here.
Good stuff folks.