Page 1 of 1
QL Interface ROMs for Preservation
Posted: Mon Dec 30, 2013 11:27 am
by RWAP
OK I have had a dig through my various EPROMs - does someone want to volunteer to read these and store them for preservation??
I have the following (excluding earlier versions):
CST QDisc v1.18
MicroP v5.3 English
DIsk + RAM v1.14 - I think that this is the PCML interface
WIN 2.02 (?)
QubIDE v1.37
QL Disc v1.14 (marked Kempston - never seen a Kempston disk interface....)
Trump Card v1.21 B
Sandy v1.21 & TK2 v2.21
Sandy Mouse QBoard v1.18
Sandy Mouse v1.18 Y
TK2 2.05 ROMCard (??)
There may well be later versions of these somewhere....
Re: QL Interface ROMs for Preservation
Posted: Tue Dec 31, 2013 2:24 am
by Dave
I'll do it happily, if nobody else offers. My location isn't really ideal, but postage costs from here are very reasonable.
Re: QL Interface ROMs for Preservation
Posted: Tue Dec 31, 2013 1:07 pm
by Derek_Stewart
Hi,
I have an Eprom Programmer that will read any Eprom.
I will have a look at producing a list of Interface ROM Firmware, with a view to storing them on a publically availble web site.
Derek
Re: QL Interface ROMs for Preservation
Posted: Fri Jan 17, 2014 9:03 pm
by cybervet
I also have a programmer if I can be of any help, just let me know.
By the way Rich, you were looking for ICE on external rom that can be used with cursor keys?
Re: QL Interface ROMs for Preservation
Posted: Fri Jan 17, 2014 9:15 pm
by RWAP
Derek is supposedly dropping by at some point, so I can give him the various EPROM chips.
Yes please - an image of the ICE ROM which works with cursor keys would be good.
Re: QL Interface ROMs for Preservation
Posted: Fri Jan 17, 2014 11:02 pm
by cybervet
Will sbytes flp1_ICE_ROM, 49152,16384 will do the trick or I need another way in order to get the image?
Tassos
Re: QL Interface ROMs for Preservation
Posted: Sat Jan 18, 2014 10:32 am
by RWAP
That should work fine thanks
Re: QL Interface ROMs for Preservation
Posted: Fri Jan 24, 2014 7:05 pm
by belg4rion67
I've acquired an external eprom dongle with MetamCo Qlc compiler version 3.02: would you want the bin file of this eprom for your project?
cheers
Paolo
Re: QL Interface ROMs for Preservation
Posted: Sun Jan 26, 2014 4:57 pm
by RWAP
belg4rion67 wrote:I've acquired an external eprom dongle with MetamCo Qlc compiler version 3.02: would you want the bin file of this eprom for your project?
cheers
Paolo
Hi Paolo,
Thank you, but I have just checked - it is v3.02 which I have already preserved
Rich