Page 1 of 1
Sinclair QL First Boot in USA 2019 - my YouTube video
Posted: Fri Nov 01, 2019 8:42 pm
by SinclairSociety
Today I booted my Sinclair QL for the 1st time.
Come watch me get excited over this 35 year old computer.
1984 in 2019 all over again!
https://youtu.be/61TCPEPBsBE
TJ
Re: Sinclair QL First Boot in USA 2019 - my YouTube video
Posted: Fri Nov 01, 2019 11:06 pm
by Chr$
I hope you re-felted the cartridges or had re-felted cartridges delivered with it! It will get messy if you don't.
Re: Sinclair QL First Boot in USA 2019 - my YouTube video
Posted: Sat Nov 02, 2019 1:10 pm
by Peter
SinclairSociety wrote:Today I booted my Sinclair QL for the 1st time.
Wohoo!
Thank you for sharing this moment! It will be interesting if you now get tempted to walk the "upgrade route" like most of us. And, if yes, which route.
On one hand a Q68 solves the usual QL limitations (memory, speed, mass storage, decent video, mouse, buffered clock, serial port) all at once. On the other hand, the Q68 is not made for the beloved QL case. And everytime I see the enthusiasm of QL returnees, I wonder if the Q68 is a too large step at once?
The SuperGoldCard is a fantastic piece of hardware, but it suffers from not being available, and not solving the video issue. Recently I had a private discussion again about an UltraGoldCard for the QL case, mainly to provide an easy upgrade for returning QL users. It's so tempting, because the enthusiasm of QL returnees is what we need.
Re: Sinclair QL First Boot in USA 2019 - my YouTube video
Posted: Sat Nov 02, 2019 2:24 pm
by robheaton
Peter wrote:It's so tempting, because the enthusiasm of QL returnees is what we need.
Hear, hear!
Re: Sinclair QL First Boot in USA 2019 - my YouTube video
Posted: Sat Nov 02, 2019 3:20 pm
by stephen_usher
Peter wrote:SinclairSociety wrote:Today I booted my Sinclair QL for the 1st time.
The SuperGoldCard is a fantastic piece of hardware, but it suffers from not being available, and not solving the video issue. Recently I had a private discussion again about an UltraGoldCard for the QL case, mainly to provide an easy upgrade for returning QL users. It's so tempting, because the enthusiasm of QL returnees is what we need.
There are three SGC clones still available from Tetroid:
https://www.sellmyretro.com/offer/detai ... lone-32756
Re: Sinclair QL First Boot in USA 2019 - my YouTube video
Posted: Sat Nov 02, 2019 4:29 pm
by SinclairSociety
stephen_usher wrote:Peter wrote:SinclairSociety wrote:Today I booted my Sinclair QL for the 1st time.
The SuperGoldCard is a fantastic piece of hardware, but it suffers from not being available, and not solving the video issue. Recently I had a private discussion again about an UltraGoldCard for the QL case, mainly to provide an easy upgrade for returning QL users. It's so tempting, because the enthusiasm of QL returnees is what we need.
There are three SGC clones still available from Tetroid:
https://www.sellmyretro.com/offer/detai ... lone-32756
Indeed I see those... I hope to save some pennies to buy 1.
TJ
Re: Sinclair QL First Boot in USA 2019 - my YouTube video
Posted: Sat Nov 02, 2019 5:52 pm
by Cristian
Thank you for sharing your video!
So, you realized the absence of a power switch
Welcome to QL world!
Re: Sinclair QL First Boot in USA 2019 - my YouTube video
Posted: Sat Nov 02, 2019 6:13 pm
by SinclairSociety
Cristian wrote:Thank you for sharing your video!
So, you realized the absence of a power switch
Welcome to QL world!
Yeh, I knew but did not. haha.
I own many Sinclair systems now and most have no power buttons but my Timex systems do. Hah!
TJ
Re: Sinclair QL First Boot in USA 2019 - my YouTube video
Posted: Sat Nov 02, 2019 7:59 pm
by Derek_Stewart
Hi TJ,
I have watched alot of your videos, which I would like say they are all very good.
The question of microdrive cartridge re-felting. I have done some reasearch, there does seem to be a problem with the sourcing of the pad with correct material.
One web site indicated the use of audio cassette felt pads. I am not sure about this.
This seem a real problem.