Glad that at least someone has/sees the same/similar problem with this core.
On my MIST, in can isolate the symptom: This core only starts well and runs stable and hourly long, when my MIST was switched off for a longer time (a long night) and when I then power on the MIST with an SD card which has this core as core.rbf. I have made a video and blog entry:
https://www.youtube.com/@QLvsJAGUAR/community
QL on MIST FPGA board
- QLvsJAGUAR
- Gold Card
- Posts: 485
- Joined: Tue Feb 15, 2011 8:42 am
- Location: Lucerne, Switzerland
- Contact:
Re: QL on MIST FPGA board
QL forever!
https://www.sinclairql.net/ - Go and get THE DISTRIBUTION & QL/E!
https://www.youtube.com/QLvsJAGUAR/community - Blog
https://www.youtube.com/QLvsJAGUAR - Dedicated QL videos
Sinclair, QL, ATARI, JAGUAR, NUON, APPLE, NeXT, MiST & much more...
Videos, pictures & information
https://www.sinclairql.net/ - Go and get THE DISTRIBUTION & QL/E!
https://www.youtube.com/QLvsJAGUAR/community - Blog
https://www.youtube.com/QLvsJAGUAR - Dedicated QL videos
Sinclair, QL, ATARI, JAGUAR, NUON, APPLE, NeXT, MiST & much more...
Videos, pictures & information
Re: QL on MIST FPGA board
Do you have coolant spray? You could try to bring the FPGA to a lower temperature and see if it starts even after being warmed up before.QLvsJAGUAR wrote: Wed Feb 28, 2024 6:44 pm On my MIST, in can isolate the symptom: This core only starts well and runs stable and hourly long, when my MIST was switched off for a longer time (a long night) [...]
If it works in a cooled condition, you probably have an FPGA timing problems.